| Hardware Specifications |
| Operating Temperature |
0~50 Degree C |
| Storage Temperature |
-25~70 Degree C |
| Operating Humidity |
10~90%, relative humidity, non-condensing |
| Power Requirement |
5V DC 2A |
| Dimension (W x D x H) |
155 x 86 x 26 mm |
| Weight |
0.38 kg |
| Performance |
Full VDSL2 bandwidth up to: (Down Stream / Up Stream)
• Asymmetric Mode
- 200m -> 100/55Mbps
- 400m -> 90/50Mbps
- 600m -> 70/40Mbps
- 800m -> 60/25Mbps
- 1000m -> 45/15Mbps
- 1200m -> 35/10Mbps
- 1400m -> 30/6Mbps
- 1600m -> 25/4Mbps
• Symmetric Mode
- 200m -> 90/90Mbps
- 400m -> 90/90Mbps
- 600m -> 70/70Mbps
- 800m -> 55/50Mbps
- 1000m -> 40/35Mbps
- 1200m -> 30/25Mbps
- 1400m -> 25/20Mbps
- 1600m -> 20/15Mbps |
| LED Indicators |
• One Power
• 4 for RJ-11 / VDSL2 WAN :
- Green, ACT
- Green, Sync
- Green, CO mode
- Green, CPE mode
• 1 for per RJ-45 10/100Base-TX port
- Green, LNK / ACT
|
| Cabling Type |
• 10Base-T: 2-pair UTP Cat.3,4,5 up to 100m (328ft)
• 100Base-TX: 2-pair UTP Cat.5, up to 100m (328ft)
• VDSL: twisted-pair telephone wires (AWG24 or better) up to 1.6km
|
| Encoding |
• VDSL-DMT
- ITU-T G.993.1 VDSL
- ITU-T G.997.1
- ITU-T G.993.2 VDSL2 (Profile 17a Support)
|
| Functionality |
• CO / CPE mode select
• Selectable fast and interleaved mode
• Selectable target band plan
• Selectable target SNR mode
|
| DIP Switch |
4 position DIP switch |
| Ports |
10/100Base-TX: 4 RJ-45, Auto-negotiation and Auto-MDI / MDI-X
VDSL: 1 RJ-11, female Phone Jack
PHONE: 1 RJ-11, Built-in splitters for POTS connection
|
| Storage Humidity |
10~90%, relative humidity, non-condensing |
| Switch Specification |
| Switch Processing Scheme |
Store-and-Forward |
| Address Table |
2K entries |
| Flow Control |
Back pressure for half duplex IEEE 802.3x Pause Frame for full duplex |
| Switch fabric |
1.6Gbps |
| Throughput (packet per second) |
11.9Mpps |
| Network cables |
10/100Base-TX:
2-Pair UTP Cat. 3,4, 5 (100meters, max.)
EIA / TIA-568 100-ohm STP (100meters, max.)
|
| Standard Conformance |
| Regulation Compliance |
FCC Part 15 Class A, CE |
| Standards Compliance |
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
ITU-T
- G.993.1 (VDSL)
- G.997.1
- G.993.2 VDSL2 (Profile 17a )
|
| * The actual data rate will vary on the quality of the copper wire or coaxial cable and environment |
网站地图
联系我们
RSS