| 硬件特性 |
| Hardware Version |
3 |
| RJ45 Port |
5 x 10/100/1000Base-T RJ45 TP auto-MDI/MDI-X, auto-negotiation |
| Connector |
Removable 6-pin terminal block
Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
|
| Alarm |
Provides one relay output for power failure Alarm relay current carry ability: 1A @ DC 24V |
| LED指示灯 |
3 x LED for system and power:
?? Green: DC Power 1
?? Green: DC Power 2
?? Green: Power Fault
2 x LED for each copper port
?? Green: 1000Mbps LNK/ACT
?? Orange:10/100Mbps LNK/ACT
|
| ESD保护 |
6KV |
| EFT保护 |
6KV |
| Power Requirement |
12~48V DC, Redundant power with polarity reverse protection function, 24V AC power support |
| 功率/损耗 |
4.8 watts / 16BTU (48V DC)
8.3 watts / 28BTU (24V DC)
|
| Installation Method |
DIN rail kit and wall-mount ear |
| Material |
IP30 metal case |
| Dimensions |
135 x 87 x 32 mm |
| Weight |
498g |
| 2层特性 |
| Processing Mode |
Store-and-Forward |
| MAC地址表 |
2K entries |
| Cache |
1M bits on-chip buffer memory |
| Flow Control |
Back pressure for half duplex IEEE 802.3x pause frame for full duplex |
| Backplane Bandwidth |
10Gbps |
| Throughput |
7.4Mpps @64bytes |
| Jumbo Frame |
9K |
| Network Cable Type |
10/100/1000Base-T
Cat. 3, 4, 5, 5e, 6 UTP cable [100 meters (max.)]
EIA/TIA-568 100-ohm STP [100 meters (max.)]
|
| 标准一致性 |
| 标准一致性 |
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3x full-duplex flow control
|
| Compliance with Regulations |
FCC Part 15 Class A, CE |
| Stability Testing |
IEC 60068-2-32 (free fall)
IEC 60068-2-27 (shock)
IEC 60068-2-6 (vibration)
|
| 环境 |
| Temperature |
Operating: -40~75 degrees C Storage: -40~75 degrees C |
| Humidity |
Operating: 5~90% Storage: 5~90% (non-condensing) |