| Hardware Specifications |
| Network Connector |
6-port RJ45 for 10/100BASE-TX, auto MDI/MDIX |
| PoE Inject Port |
4-port with 802.3af/at PoE injector function (Port-1 to Port-4) |
| LED Display |
System:
Power (Orange)
Per PoE port:
PoE (Orange, Port 1 to Port 4)
LNK/ACT (Green, Port 1 to Port 6) |
| DIP Switch |
100m distance in standard mode
250m distance in extend mode (based on the cable category)
|
| Switch Architecture |
Store and Forward switch architecture |
| MAC Address Table |
2K MAC address table with auto learning function |
| Switch Fabric |
1.2Gbps |
| Switch Throughput |
0.89Mpps @64bytes |
| Maximum Packet Size |
1536bytes |
| Flow Control |
Back pressure for half duplex. IEEE 802.3x pause frame for full duplex |
| Power Requirements |
AC 100~240V, 2A max. |
| Power Consumption |
Max. 63 watts, 214 BTU |
| Dimensions (W x D x H) |
168 x 86 x 32 mm |
| Weight |
499g |
| ESD Protection |
Contact discharge of ±4KV DC
Air discharge of ±6KV DC
|
| Surge Immunity |
±4KV |
| Power over Ethernet |
| PoE Standard |
IEEE 802.3af Power over Ethernet/PSE
IEEE 802.3at Power over Ethernet Plus/PSE
|
| PoE Power Supply Type |
End-span |
| Power Pin Assignment |
1/2(+), 3/6(-) |
| PoE Power Output |
Per Port 52V DC, 300mA. max. 15.4 watts (IEEE 802.3af)
Per Port 52V DC, 600mA. max. 30 watts (IEEE 802.3at)
|
| PoE Power Budget |
60 watts |
| Number of PDs, 7 watts |
4 |
| Number of PDs, 15.4 watts |
4 |
| Number of PDs, 30 watts |
2 |
| Standard Conformance |
| EMI Safety |
CE, FCC |
| Standard Compliance |
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3x Flow Control
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus |
| Environment |
| Operating Environment |
0 ~ 50 degrees C |
| Storage Environment |
-10 ~ 70 degrees C |
| Operating Humidity |
5 ~ 95%, relative humidity, non-condensing |
| Storage Humidity |
5 ~ 95%, relative humidity, non-condensing |
Site Map
Contact Us
RSS