| Hardware Specifications |
| Network Connector |
PoE In Port
1 x 10/100/1000BASE-T Ethernet with IEEE 802.3bt PoE++ “Data + DC” in, auto MDI/MDI-X, auto-negotiation RJ45 connector
PoE Out Port
4 x 10/100/1000BASE-T Ethernet with IEEE 802.3af/802.3at PoE “Data + DC” out, auto MDI/MDI-X, auto-negotiation RJ45 connector |
| Data Rate |
10/100/1000Mbps |
| Switch Architecture |
Store-and-Forward |
| MAC Address Table |
2K |
| Data Buffer |
1Mbits |
| Switch Fabric |
10Gbps |
| Switch Throughput |
7.44Mpps @ 64 bytes |
| Jumbo Frame |
9K |
| Flow Control |
IEEE 802.3x pause frame for full duplex Back pressure for half duplex |
| LED Indicators |
PoE In Port
10/100/1000 LNK/ACT (green)
PoE Out Port 1 to Port 4
10/100/1000 LNK/ACT (green)
PoE-in-Use (orange)
PWR (orange) |
| Protection |
ESD: Contact 4KV, Air 6KV
Surge: 4KV |
| Enclosure |
Metal |
| Installation |
Desktop/Wall mountable |
| Dimensions (W x D x H) |
168 x 94 x 32 mm |
| Weight |
403g |
| Power Requirements |
PoE In: IEEE 802.3bt or 4-pair 802.3at PoE+ compliant with voltage within 50V-56V DC
External DC: 50~56V DC |
| Power Consumption |
0.9 watts/3.1BTU (System on)
74 watts/252.4BTU (Full loading with PoE function) |
| Network Cable |
10BASE-T: 4-pair UTP Cat5 up to 100m (328ft)
100BASE-TX: 4-pair UTP Cat5 up to 100m (328ft)
1000BASE-T: 4-pair UTP Cat5e, 6, up to 100m (328ft)
EIA/TIA-568 100-ohm STP (100m, 328ft) |
| Power over Ethernet |
| PoE Standard |
PoE In Port
IEEE 802.3bt Power over Ethernet Plus Plus end-span and mid-span PD class 4 PD
Per PoE Out Port
IEEE 802.3at Power over Ethernet Plus end-span PSE
IEEE 802.3af Power over Ethernet end-span PSE |
| PoE Power |
PoE In Port
50~56V DC, max. 95 watts input
Per PoE Out Port
50~55V DC, max. 32 watts output |
| Power Pin Assignment |
PoE In Port
1/2 (-), 3/6 (+); 4/5 (+), 7/8 (-)
Per PoE Out Port
1/2 (-), 3/6 (+), end-span (Type A) |
| PoE Power Budget |
65 watts (max.) @ IEEE 802.3bt PoE++ Type 4 PSE input
32 watts (max.) @ IEEE 802.3at PoE+ input |
| Standard Conformance |
| Regulatory Compliance |
FCC Part 15 Class A, CE |
| Standard Compliance |
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3bt Power over Ethernet Plus Plus
IEEE 802.3x Flow Control |
| Environment |
| Operating |
Temperature: 0 ~ 50 degrees C
Relative Humidity: 5 ~ 95% (non-condensing) |
| Storage |
Temperature: -10 ~ 70 degrees C
Relative Humidity: 5 ~ 95% (non-condensing) |