| Hardware Specifications |
| PoE IN |
1 x 10/100/1000BASE-T Ethernet with IEEE 802.3bt/at/af PoE “Data + DC＂in
auto MDI/MDI-X, auto-negotiation RJ45 connector |
| PoE OUT |
1 x 10/100/1000BASE-T Ethernet with IEEE 802.3bt/at/af PoE ＂Data + DC” out
auto MDI/MDI-X, auto-negotiation RJ45 connector |
| DIP Switch |
PoE power feeding options (BT/UPOE) selection |
| Dimensions (W x D x H) |
93.5 x 70 x 26 mm |
| Weight |
258g |
| Power Requirements |
IEEE 802.3bt PoE++ compliant with voltage within 52V-56V DC
IEEE 802.3af PoE compliant with voltage within 44V-56V DC |
| Power Consumption |
2.4 watts (system maximum) /PoE Output at maximum 60 watts |
| Enclosure |
Metal |
| Installation |
Wall or DIN-rail mounting |
| Protection |
ESD (Ethernet): 2KV
Surge (EFT for power) : 2KV |
| LED Indicators |
1 x PWR (Green)
1 x PoE IN Data (Green)
1 x PoE OUT Data (Green)
1 x PoE Out : PoE-in-use (Green: BT PD; Amber UPOE PD) |
| Network Cable |
10BASE-T: 4-Pair UTP Cat. 5 up to 100m (328ft)
100BASE-TX: 4-Pair UTP Cat. 5 up to 100m (328ft)
1000BASE-T: 4-Pair UTP Cat. 5e, 6, up to 100m (328ft)
EIA/TIA- 568 100-ohm STP (100m, 328ft) |
| Switching Specifications |
| Data Rate |
10/100/1000Mbps |
| Switch Architecture |
Store-and-Forward |
| Switch Throughput |
10Mbps:14880pps@64Bytes
100Mbps:148810pps@64Bytes
1000Mbps:1488000pps@64Bytes |
| Maximum Frame Size |
9K bytes |
| Flow Control |
Back pressure for half duplex
IEEE 802.3x pause frame for full duplex |
| Power over Ethernet |
| PoE Standard |
＂PoE In” Port
IEEE 802.3bt Power over Ethernet Plus end-span/mid-span PD class 4 PD
Per “PoE Out” Port
IEEE 802.3bt Power over Ethernet Plus end-span PSE
Backward compatible with IEEE 802.3af/at Power over Ethernet standard |
| PoE Power Supply Type |
End-span + Mid-span |
| PoE Power |
“PoE In” Port
50-56V DC, max. 95 watts PoE input
“PoE Out” Port
55V DC, max. 65 watts PoE budget |
| Power Pin Assignment |
“PoE In” Port
1/2 (-), 3/6 (+); 4/5 (+), 7/8 (-)
“PoE Out” Port
1/2 (-), 3/6 (+); 4/5 (+), 7/8 (-) |
| Maximum Distance |
400 meters with daisy-chain installation of 3 units |
| Standards Conformance |
| Regulatory Compliance |
FCC Part 15 Class A, CE |
| Standard Compliance |
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3bt Power over Ethernet Plus Plus
IEEE 802.3x Flow Control
IEEE 802.3az Energy Efficient Ethernet (EEE) |
| Environment |
| Operating |
Temperature: -10 ~ 60 degrees C
Relative Humidity: 5 ~ 95% (non-condensing) |
| Storage |
Temperature: -40 ~ 85 degrees C
Relative Humidity: 5 ~ 95% (non-condensing) |
网站地图
联系我们
RSS