| Hardware Specifications |
| Copper Interface |
One 10G/5G/2.5G/1G/100BASE-T RJ45 interface with auto MDI/MDI-X function |
| PoE PD |
Yes |
| Fiber Interface |
Two 10G/2.5G/1G/100BASE-X SFP+ interfaces |
| Reset Button |
< 5 sec.: System reboot
> 5 sec.: Factory default |
| Connector |
Removable 6-pin terminal block for power input
Pin 1/2 for Power 1, Pin 3/4 for Alarm, Pin 5/6 for Power 2 |
| Alarm |
One relay output for power failure. Alarm relay current carry ability: 1A @ 24VDC |
| Enclosure |
IP40 metal case |
| ESD Protection |
4KVDC Contact / 8KVDC Air |
| Installation |
Wall-mount and DIN-rail kit installation |
| Dimensions (W x D x H) |
50 x 86.4 x 135mm |
| Weight |
604g |
| Power Requirement |
9~48V DC, 24V AC or PoE input |
| Power Consumption |
3.9W/13.3 BTU (No Loading) / 9.5W/32.4 BTU (Full Loading) |
| LED Indicator |
System:
PWR 1 (Green)
PWR 2 (Green)
Alarm (Red)
Per 10GBASE-T RJ45 Port:
1G/100 LINK/ACT (Green)
2.5G/5G LINK/ACT (Green)
10G LINK/ACT (Amber)
Per 10GBASE-X SFP+ Port:
1G LINK/ACT (Green)
2.5G LINK/ACT (Green)
10G LINK/ACT (Amber) |
| Transmission Specifications |
| Processing Scheme |
Store and Forward |
| Fabric |
60Gbps |
| Throughput (packet per second) |
29.76Mpps@64bytes |
| Address Table |
16K entries, automatic source address learning and aging |
| Flow Control |
Back pressure for half duplex
IEEE 802.3x pause frame for full duplex |
| Jumbo Frame |
9K |
| Shared Buffer |
12Mbits |
| Layer 2 Function |
| Port Configuration |
Port disable/enable
Auto-negotiation 100Mbps, 1/2.5/5/10Gbps full and half duplex mode selection
Flow control disable/enable |
| Port Status |
Display each port’s link status, speed, Auto-negotiation status, duplex mode, flow control status |
| VLAN |
IEEE 802.1Q tag-based VLAN
IEEE 802.1ad Q-in-Q tunneling
Up to 256 VLAN groups, out of 4096 VLAN IDs |
| Bandwidth Control |
Per port bandwidth control
Ingress: 16~10,000,000Kbps
Egress: 16~10,000,000Kbps |
| QoS |
Traffic classification based, strict priority and WRR
8-level priority for switching
Traffic classification:
Cos/802.1p
DSCP
IP Precedence |
| Ring |
Supports ERPS, and complies with ITU-T G.8032
Recovery time < 450ms |
| Security Function |
| Access Security |
Remote management protocols support: SSH, Telnet, HTTP and HTTPs
Protected ports |
| System Management |
| Basic Management Interfaces |
Telnet, Web browser, SNMP v1, v2c |
| Secure Management Interfaces |
SSHv2, TLSv1.2, SNMPv3 |
| System Management |
Firmware upgrade by HTTP protocol through Ethernet network
Configuration upload/download through HTTP
LLDP protocol
SNTP
PLANET Smart Discovery Utility
PLANET NMS Controller
PLANET CloudViewerPro mobile app |
| Event Management |
Remote syslog
Local system log
SNMP trap |
| SNMP MIBs |
RFC 1213 MIB-II
RFC 2863 IF-MIB
RFC 1493 Bridge MIB
RFC 1643 Ethernet MIB
RFC 2863 Interface MIB
RFC 2665 Ether-Like MIB
RFC 2737 Entity MIB
RFC 2819 RMON MIB (Groups 1, 2, 3 and 9)
RFC 3411 SNMP-Frameworks-MIB
LLDP
MAU-MIB |
| Standards Conformance |
| Regulatory Compliance |
FCC Part 15 Class A, CE |
| Stability Testing |
IEC60068-2-32 (free fall)
IEC60068-2-27 (shock)
IEC60068-2-6 (vibration) |
| Standards Compliance |
IEEE 802.3u, 100BASE-TX/FX
IEEE 802.3ab, 1000BASE-T
IEEE 802.3bz, 2.5G/5GBASE-T
IEEE 802.3an, 10GBASE-T
IEEE 802.3z, 1000BASE-SX/LX
IEEE 802.3ae 10GBASE-SR/LR
IEEE 802.3x full-duplex flow control
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN tagging
IEEE 802.1ad Q-in-Q VLAN stacking
IEEE 802.1ab LLDP
RFC 768 UDP
RFC 2474 DSCP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
ITU-T G.8032 ERPS Ring |
| Environment |
| Operating |
Temperature: -40 ~ 75 degrees C
Relative Humidity: 5 ~ 95% (non-condensing) |
| Storage |
Temperature: -40 ~ 85 degrees C
Relative Humidity: 5 ~ 95% (non-condensing) |
Site Map
Contact Us
RSS