| Hardware Specifications |
| Copper Ports |
Four 10/100BASE-TX RJ45 auto-MDI/MDI-X ports (Ports 1 to 4) |
| PoE Injector Ports |
Four ports with 802.3af/at PoE+ injector function (Ports 1 to 4) |
| SFP Port |
One port 100BASE-FX SFP port |
| Connector |
Removable 6-pin terminal block
Pin 1/2 for Power 1
Pin 3/4 for power fault alarm
Pin 5/6 for Power 2 |
| DIP Switch (Ports 1 to 4) |
Standard mode: 30-watt PoE transmission distance of 100m at speed of 10/100Mbps
VLAN mode: "Port-based VLAN Protection" where ports can be isolated from each other via one DIP switch. Only Port-5 can visit other ports.
Extend mode: 25-watt PoE transmission distance of 250m at speed of 10Mbps |
| Power Requirements |
12~54V DC, 7A (max.) |
| Power Consumption |
Max. 7 watts/23.8BTU@54V DC input (System)
Max. 133 watts/453BTU@54V DC input (Ethernet + PoE Full Loading) |
| Alarm |
One relay output for power failure.
Alarm relay current carry ability: 1A @ 24V AC |
| Dimensions (W x D x H) |
50 x 87.8 x 135 mm |
| Weight |
613g |
| Enclosure |
IP40 metal case |
| Installation |
DIN-rail/ wall-mount |
| ESD Protection |
5KV |
| LED Indicators |
3 x LED for System and Power:
Green: DC Power 1
Green: DC Power 2
Red: Power Fault Alarm
2 x LED for PoE +Copper Port (Ports 1 to 4):
Green: LNK/ACT (10/100Mbps)
Amber: PoE-in-Use
1 x LED for 100BASE-FX Port (Port 5):
Green: LNK/ACT (100Mbps)
4 x LED for PoE Usage(W) (Low to high):
Amber: 30W, 60W, 90W and 120W |
| Switch Specifications |
| Switch Architecture |
Store-and-Forward |
| Switch Fabric |
1Gbps/non-blocking |
| Throughput (packet per second) |
0.74Mpps @64 bytes |
| Address Table |
1K entries |
| Jumbo Frame |
1536 bytes |
| Flow Control |
Back pressure for half duplex IEEE 802.3x pause frame for full duplex |
| Power over Ethernet |
| PoE Standard |
IEEE 802.3at Power over Ethernet Plus/PSE |
| PoE Power Supply Type |
End-span |
| Power Pin Assignment |
1/2 (+), 3/6 (-) |
| PoE Power Output |
Per port 54V DC, Max. 36 watts |
| PoE Power Budget (max.) |
120W maximum @54V DC
90W maximum@24V DC
60W maximum@12V DC |
| Max. Number of Class 2 PDs |
4 |
| Max. Number of Class 3 PDs |
4 |
| Max. Number of Class 4 PDs |
4 |
| Standards Conformance |
| Regulatory Compliance |
FCC Part 15 Class A, CE |
| Stability Testing |
IEC 60068-2-32 (free fall)
IEC 60068-2-27 (shock)
IEC 60068-2-6 (vibration) |
| Standards Compliance |
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3x Flow Control and Back Pressure
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
PROFINET Traffic Pass-through with QoS |
| Environment |
| Temperature |
Operating: -40~75 degrees C
Storage: -40~85 degrees C |
| Humidity |
Operating: 5~90% (non-condensing)
Storage: 5~90% (non-condensing) |